Concrete Cutting In Liverpool: Tips For The Job

Concrete Cutting In Liverpool: Tips For The Job

Concrete Cutting in Liverpool is one of the toughest jobs ever. But this job does not need to be hard always. There are many easy ways to cut concrete slabs and blocks or floors and walls. Most of you share a love-hate relationship with concrete. If you need to repair it, you often hate it, but you love it when looking for a permanent, water-resistant surface. 

Types of Blades Used

Different blades have their advantages and disadvantages. There are many types of blades that you can use for Concrete Cutting in Liverpool.

  • Dry-cutting Diamond Blades- These blades often have serrated rims that help to eject waste and cool down the blade. It is best to make a series of deep cuts to avoid overheating. The only negative side to it is the dust that it creates. If you use it for indoor concrete cutting, make sure to shut all the surrounding areas with duct tape and plastic. It would be best if you also sealed the duct openings. If the diamond blade you are using stops cutting, the material you are cutting is too soft.

  • Abrasive Corundum Masonry Blades- these are the cheap blades that are easily available. They have the capability to cut through the asphalt and the concrete. It usually consists of a metal blade with a diamond or a metal composite towards the perimeter. When you use the blades to cut concrete, the composite wears away gradually. This reveals sharp and fresh diamond cutting edges for the purpose of Concrete Cutting in Liverpool.

  • Wet-Cutting Diamond Blades- it has a continuous and smooth perimeter. Water helps to lubricate the blade and keep it cool. These types of blades cut the concrete in a clean and fast way. It requires a special saw that allows you to use it safely and distribute water. 

Whenever you have a big project lined up, you need to hire a track guide that will help you to save both time and money.

Dos and Don’ts of Saw Cutting

When you do not need your Concrete Cutting Services in Campbell Town to be accurate, you may use a hand sled or a cold chisel to cut it. You need to score the cutting length thrice or more with the help of a chisel. 

  • Do not force the blade for Concrete Cutting Services in Campbell Town. It would be best to let the saw and the blade weight cut.
  • You must always use a wet blade with water. But you may use a dry blade with or without water.
  • In order to prevent over-heating, you must allow the dry blade to run freely every 30 to 45 seconds.
  • You must use respiratory, eyesight, and hearing protection whenever you go for a dry cutting.

Required Tools for the Cutting

Whenever you have Concrete Cutting Services in Campbell Town lined up, you must have the necessary tools to save time. Some of the tools include:

  • Circular saw
  • Chalk line
  • Dust mask
  • Cold chisel
  • Diamond blade
  • Corundum blade
  • Extension cord
  • Tape measure
  • Hammer
  • Gas-powered saw
  • Safety glasses
  • Wet-cutting saw
  • Sled hammer
  • Hearing protection



Follow Our Blogs...